基本信息
安柏涛  男  硕导  中国科学院工程热物理研究所
email: anbt@mail.etp.ac.cn
address: 北四环西路11号
postalCode: 100190

招生信息

   
招生专业
080701-工程热物理
080703-动力机械及工程
招生方向
燃气透平传热与冷却

教育背景

2002-12--2004-12   中国科学院工程热物理研究所   博士后
1998-09--2002-10   哈尔滨工业大学   博士学位
1996-09--1998-07   哈尔滨工业大学   硕士学位
1988-09--1992-07   哈尔滨工业大学   学士学位

工作经历

   
工作简历
2005-01~现在, 中国科学院工程热物理研究所, 副研究员
2002-12~2004-12,中国科学院工程热物理研究所, 博士后
1998-09~2002-10,哈尔滨工业大学, 博士学位
1996-09~1998-07,哈尔滨工业大学, 硕士学位
1992-08~1996-09,哈尔滨汽轮机有限责任公司, 技术员
1988-09~1992-07,哈尔滨工业大学, 学士学位

专利与奖励

   
专利成果
( 1 ) 一种冷却结构, 2023, 第 1 作者, 专利号: CN114198154B

( 2 ) 一种冷却结构, 2023, 第 1 作者, 专利号: CN114198155B

( 3 ) 一种涡轮叶片强化扰流柱冷却结构, 2023, 第 2 作者, 专利号: CN115585022A

( 4 ) 透平叶片前缘气膜冷却结构, 2022, 第 1 作者, 专利号: 2022091300337470

( 5 ) 透平叶片前缘气膜冷却结构, 2022, 第 1 作者, 专利号: CN115045720A

( 6 ) 一种冷却结构, 2022, 第 1 作者, 专利号: CN114198154A

( 7 ) 一种冷却结构, 2022, 第 1 作者, 专利号: CN114198155A

( 8 ) 一种涡轮叶片及用于涡轮叶片内冷通道的V型凹陷肋结构, 2020, 第 3 作者, 专利号: CN211715180U

( 9 ) 陶瓷-金属相结合的透平导向叶片及其燃气轮机, 2020, 第 2 作者, 专利号: CN211058869U

( 10 ) 一种透平叶片尾缘冷却结构, 2020, 第 2 作者, 专利号: CN111412020A

( 11 ) 具有槽形截面气膜孔排的带肋横流通道, 2020, 第 1 作者, 专利号: CN111120009A

( 12 ) 一种横向扩张子午收缩槽形气膜孔, 2020, 第 1 作者, 专利号: CN111042872A

( 13 ) 一种用于涡轮叶片内冷通道的V型凹陷肋结构, 2020, 第 3 作者, 专利号: CN111005769A

( 14 ) 一种离散气膜冷却孔结构, 2018, 第 1 作者, 专利号: CN106437866B

( 15 ) 一种透平叶片冷却结构, 2018, 第 2 作者, 专利号: CN207879399U

( 16 ) 一种双层壁冷却与气膜冷却组合式透平叶片结构, 2018, 第 2 作者, 专利号: CN108425705A

( 17 ) 一种离散气膜冷却孔结构, 2017, 第 1 作者, 专利号: CN106437866A

( 18 ) 一种离散气膜冷却孔, 2015, 第 1 作者, 专利号: CN104747242A

( 19 ) 一种离散气膜冷却孔型, 2013, 第 1 作者, 专利号: CN103244196A

( 20 ) 一种考虑进口热斑的燃气透平导向器, 2013, 第 1 作者, 专利号: CN103061826A

( 21 ) 一种提高离散孔气膜冷却效率的结构, 2011, 第 1 作者, 专利号: CN102140964A

( 22 ) 强化换热装置, 2008, 第 3 作者, 专利号: CN201093913Y

出版信息

   
发表论文
(1) Film Cooling Effectiveness on Pressure Surface and Suction Surface of Turbine Guide Vane with Diffusion Slot Holes, JOURNAL OF TURBOMACHINERY, 2023, 通讯作者
(2) Experimental Investigation on Overall Effectiveness of Flat Plate Combined Impingement Cooling with Film-Cooling of Diffusion Slot Holes, ASME Turbo Expo, 2023, 通讯作者
(3) Effect of Coolant Crossflow on Film Cooling Effectiveness of Diffusion Slot Hole With and Without Ribs, JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2022, 第 2 作者
(4) Experimental Investigation of Film Cooling Performance on Blade Endwall With Diffusion Slot Holes and Stator-Rotor Purge Flow, JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2021, 第 4 作者
(5) 垂直横流通道内槽型截面孔气膜冷却特性数值研究, Numerical Investigation on Film Cooling Characteristics of Slot-Sectional Holes in Perpendicular Cross-Flow Channels, 推进技术, 2020, 第 3 作者
(6) Numerical investigation on film cooling characteristics of slot-sectional diffusion holes combined with an internal cross-flow channel, APPLIED THERMAL ENGINEERING, 2020, 通讯作者
(7) Experimental investigation of film cooling effectiveness on a gas turbine blade pressure surface with diffusion slot holes, APPLIED THERMAL ENGINEERING, 2020, 通讯作者
(8) NUMERICAL INVESTIGATION OF THE EFFECT OF INLET FLOW ANGLE ON FILM COOLING PERFORMANCE FOR THE BLADE TIP WITH SUCTION SURFACE SQUEALER RIM, PROCEEDINGS OF THE ASME TURBO EXPO: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, 2019, VOL 5A, 2019, 第 4 作者
(9) The investigations of slot film outflow used on the laminated cooling configuration, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2019, 第 3 作者
(10) Effects of Mainstream Turbulence Intensity and Coolant-to-Mainstream Density Ratio on Film Cooling Effectiveness of Multirow Diffusion Slot Holes, JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2019, 通讯作者
(11) Numerical investigation of the film cooling effectiveness on the suction surface squealer tip with different film-hole arrangements, ACGT, 2018, 第 1 作者
(12) Numerical Investigation on Film Cooling Performance of Fusiform Diffusion Holes, JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2018, 通讯作者
(13) 燃气轮机透平叶片流-热-固耦合分析及蠕变寿命预测, Fluid-thermal-mechanical Coupling Analysis and Creep Life Prediction of Gas Turbine Blade, 燃气轮机技术, 2018, 第 4 作者
(14) Effects of Inclination Angle, Orientation Angle, and Hole Length on Film Cooling Effectiveness of Rectangular Diffusion Holes, JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2018, 通讯作者
(15) Performance of differential synthetic aperture ladar versus phase-gradient autofocus at large phase errors and low return levels, OPTICAL ENGINEERING, 2018, 
(16) Numerical Investigation on Diffusion Slot Hole With Various Cross-Sectional End Shapes, JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2017, 通讯作者
(17) A TWO-DIMENSIONAL ANALYTICAL METHOD FOR TURBINE BLADE COOLING DESIGN, PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2017, VOL 2B, 2017, 第 3 作者
(18) Geometrical Parameter Effects on Film-Cooling Effectiveness of Rectangular Diffusion Holes, JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2017, 通讯作者
(19) Experimental demonstration of tri-aperture Differential Synthetic Aperture Ladar, OPTICS COMMUNICATIONS, 2017, 
(20) Investigation on Cooling Effectiveness and Aerodynamic Loss of a Turbine Cascade with Film cooling, JOURNAL OF THERMAL SCIENCE, 2016, 第 4 作者
(21) The influences of element layout and coolant ejection angle on overall cooling effectiveness of laminated cooling configuration, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2016, 第 3 作者
(22) Film cooling effectiveness measurements of a near surface streamwise diffusion hole, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2016, 通讯作者
(23) Calculation of Film-Cooling Effectiveness and Aerodynamic Losses Using DES/SAS and RANS Methods and Compared With Experimental Results, 2016, 
(24) 平板气膜冷却气动损失影响实验研究, 2015年中国工程热物理学会气动学学术年会, 2015, 第 3 作者
(25) 主流马赫数对不同气膜孔结构冷却效果及气动损失影响研究, Influence of Mainstream Mach Number on Cooling Effectiveness and Aerodynamic Losses of Different Film Cooling Configurations, 燃气轮机技术, 2015, 第 3 作者
(26) 吹风比对不同气膜孔结构冷却效率及损失影响研究, 2014年工程热物理学会, 2014, 第 2 作者
(27) Thermo-Elastc Analysis on the Flat-Plate Film-Cooling, ASME, 2014, 第 2 作者
(28) Flowfield and Heat Transfer past an Unshrouded Gas Turbine Blade Tip with Different Shapes, JOURNAL OF THERMAL SCIENCE, 2013, 第 4 作者
(29) Film Cooling of Cylindrical Hole With a Downstream Short Crescent-Shaped Block, JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2013, 通讯作者
(30) Flowfield and Heat Transfer past an Unshrouded Gas Turbine Blade Tip with Different Shapes, Flowfield and Heat Transfer past an Unshrouded Gas Turbine Blade Tip with Different Shapes, 热科学学报:英文版, 2013, 
(31) 三流程蛇形冷却通道导流优化设计研究, 中国工程热物理学会, 2012, 第 3 作者
(32) 气冷涡轮叶片传统热分析中热边界条件的影响, Influence of Thermal Boundary Conditions in Conventional Heat Transfer Analysis of an Air-Cooled Turbine Vane, 工程热物理学报, 2012, 第 4 作者
(33) 多级轴流透平气动特性计算方法研究, Investigation on the Computational Method of Axial Turbine Aerodynamic Characteristics Based on 1.5 Dimensional Euler Equations, 工程热物理学报, 2011, 第 3 作者
(34) 复合角双射流气膜冷却的研究, Study of the Air-film Cooling of a Dual-jet-flow with a Composite Angle, 热能动力工程, 2011, 第 3 作者
(35) Effects of Axial Row-Spacing for Double-Jet Film-Cooling on the Cooling Efectiveness, ASME, 2011, 第 3 作者
(36) 基于单色捕捉技术的透平导叶传热系数测量, Heat Transfer Coefficients Measurement of Turbine Guide Vane Based on Single-Color Capture Technology, 工程热物理学报, 2011, 第 3 作者
(37) 基于1.5维欧拉方程的多级轴流透平气动特性计算方法研究, 中国工程热物理学会(热机气动热力学), 2010, 第 3 作者
(38) Leading Edge Film Cooling Enhancement for an Inlet Guide Vane with Fan- Shaped Holes, Leading Edge Film Cooling Enhancement for an Inlet Guide Vane with Fan- Shaped Holes, JOURNAL OF THERMAL SCIENCE, 2010, 第 2 作者
(39) 非均匀有理B样条曲线及节点插入算法在透平叶片优化设计中的应用, Application of non-uniform rational B-spline curve and knot insertion algorithm to turbine blade optimization, 航空动力学报, 2010, 第 3 作者
(40) 基于窄带液晶单色捕捉技术的透平导叶全表面传热系数测量, 中国工程热物理学会(热机气动热力学), 2010, 第 3 作者
(41) Numerical Investigation on Unsteady Effects of Hot Streak on Flow and Heat Transfer in a Turbine Stage, JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2009, 通讯作者
(42) 静叶前缘气膜冷却特性的数值模拟及改进设计, Numerical simulation and design improvement of leading-edge film cooling in an inlet guide vane, 航空动力学报, 2009, 第 2 作者
(43) 交替大小肋片方腔通道内换热性能的数值模拟, Numerical simulation on heat transfer in duct roughened by periodic alternate scale ribs, 航空动力学报, 2008, 第 4 作者
(44) 内部结构对空冷叶片换热性能的影响, The lnfluence of Inner Structures on the Heat Exchange Performance of Air-cooled Blades, 热能动力工程, 2008, 第 4 作者
(45) 透平导叶闭式蒸汽冷却方案研究, INVESTIGATION ON COLSED-LOOP STEAM COOLING SCHEMES OF A GAS TURBINE GUIDE-VANE, 工程热物理学报, 2008, 第 4 作者
(46) 复杂空冷叶片换热特性研究, Calculations of Heat Transfer in an Air-cooled Blade, 燃气涡轮试验与研究, 2008, 第 4 作者
(47) Simulation of 3D flow in turbine blade rows including the effects of coolant ejection, JOURNAL OF THERMAL SCIENCE, 2008, 第 2 作者
(48) Numerical Investigation of Fluid Flow and Heat Transfer in a Turbine Blade With Serpentine Passage and Latticework Cooling, PROCEEDINGS OF THE ASME TURBO EXPO 2008, VOL 4, PTS A AND B, 2008, 
(49) 非对称蛇形旋转通道换热及流场数值研究, CALCULATIONS OF HEAT TRANSFER AND FLUID FLOW IN AN UNSYMMETRICAL RIB-ROUGHENED BRANCH OF A ROTATING TWO-PASS DUCT, 工程热物理学报, 2007, 第 3 作者
(50) 内冷涡轮叶栅三维气热耦合数值模拟, Numerical simulation of conjugate heat transfer for an internally cooled 3-D turbine blade, 航空动力学报, 2007, 第 3 作者
(51) 空冷透平静叶气膜冷却数值研究, 工程热物理学报, 2005, 第 1 作者
(52) 4级空气冷却透平气动性能三维数值研究, 3D Numerical Investigation on the Aerodynamic Performance of an Air Cooled 4 - Stage Turbine, 航空发动机, 2005, 第 1 作者
(53) 前置导叶对两种涡轮导向器及涡系结构的影响, Effects of front guide blade on performance and vortices structure in two turbine low pressure guide vanes, 推进技术, 2004, 第 1 作者
(54) 涡轮导向器几何与气动参数对通道涡影响的实验与数值研究, Experimental and Numerical Investigation on Effects of Turbine Guide Vane Geometric and Aerodynamic Parameters on Passage Vortex, 航空学报, 2004, 第 1 作者
(55) 几何参数对涡轮低压导向器变工况性能的影响, Effects of Geometry Parameters on Incidence Characteristics of Turbine Low Pressure Guide Vane, 航空动力学报, 2004, 第 1 作者
(56) 涡轮低压导向器优化前后气动性能对比实验研究, Comparison of Turbine Low Pressure Guide Vane before and After Optimization, 航空动力学报, 2004, 第 4 作者
(57) 流道几何参数对低压导向器气动性能的影响, The Impact of Flow-passage Geometric Parameters on the Aerodynamic Performance of a Low-pressure Guide Vane Assembly, 热能动力工程, 2003, 第 1 作者

科研活动

   
参与会议
(1)Numerical Investigation of the Effect of Inlet Flow Angle on Film Cooling Performance for the Blade Tip with Suction Surface Squealer Rim   2019-06-08
(2)Numerical investigation of the film cooling effectiveness on the suction squealer tip with different film-hole arrangements   2018-10-18
(3)Numerical investigation of the film cooling effectiveness on the suction squealer tip with different film-hole arrangements   2018-10-18
(4)A TWO-DIMENSIONAL ANALYTICAL METHOD FOR TURBINE BLADE COOLING DESIGN    2017-06-13
(5)Numerical Investigation on Unsteady Effects of Hot Streak on Flow and Heat Transfer in a Turbine Stage   An Bai-Tao, Liu Jian-Jun, Jiang Hong-De   2008-06-09
(6)Three-Dimensional Flow Analysis and Design Improvement of Leading-Edge Film-Cooling in An Inlet Guide Vane   An Bai-Tao, Liu Jian-Jun, Jiang Hong-De   2006-05-08