基本信息
王海刚  男  博导  中国科学院工程热物理研究所
电子邮件: wanghaigang@iet.cn
通信地址: wanghaig@hotmail.com
邮政编码: 100190

研究领域

多相流动数值计算与实验测量

招生信息

   
招生专业
080701-工程热物理
081002-信号与信息处理
080702-热能工程
研究方向
多相流实验测量和数值计算
过程层析成像
流态化颗粒制备

教育背景

2000-08--中国科学院工程热物理研究所   博士
1996-08--大连理工大学   硕士
1992-08--哈尔滨工程大学   学士
学历
-- 研究生
学位
-- 博士

工作经历

      王海刚,二级研究员,长期从事气固两相流动数值计算和实验测量研究,先后主持过一项国家自然科学基金重点国际合作项目、两项国家自然科学基金项目面上项目、一项基金委与英国皇家学会合作交流项目,主持中国科学院重大科研仪器研制、创新交叉团队和对外重点国际合作项目,获得英国皇家学会牛顿高级学者基金,参与三项国家自然科学基金项目,做为主要科研骨干参与中国科学战略先导专项A:超临界循环流化床燃烧技术及示范;项目,负责其中的超临界环形炉膛数值计算任务。王海刚研究员针对循环流化床大型化研发过程复杂气固流动过程关键参数测量,提出了一种新的电容层析成像和微波多普勒信息融合的非侵入式测量方法,形成了电容层析成像在复杂气固流动条件下的非线性成像算法,并应用于复杂炉膛结构循环流化床及颗粒干燥流化床系统中气固流动过程关键参数测量,为该技术在工业过程应用提供了新思路;建成了基于颗粒离散元计算的CPFD数值计算平台,成功应用于大型循环流化床复杂气固多相流动和传热数值模拟,为工业应用提供设计参考;设计和搭建了集干燥、混合和包衣于一体的流化床颗粒制备系统,将电容和微波层析成像融合测量应用于该过程,为颗粒制备过程提供了一种在线、无损快速检测方法。至今为止在国际期刊(包括Chemical Engineering Science 和 AIChE Journal等重要国际期刊)发表SCI文章80篇,国际会议文章70多篇,中文核心期刊文章20多篇,论文他引超过1000次,SCI他引超过600次,国际期刊Chemical Enginering Science、Powder Technology和Applied Thermal Engineering期刊邀请综述论文三篇,国际会议邀请报告十次(如:2014年IEEE IST国际会议、亚洲颗粒技术大会APT2015、国际电磁理论会议PIERS2017、2018年国际颗粒技术大会WCPT8)。多次担任重要国际学术会议组委会委员和分会主席,包括国际流态化会议Fluidization XVI、Fluidization XVII、CFB11、国际颗粒技术大会(WCPT)、IEEE-IST系列会议、亚洲颗粒技术大会(APT)等,40个国际期刊通讯评审人。《工程热物理学报》编委(2012年-2020年),中国工程热物理学会多相流专业委员会委员,中国计量测试学会多相流专业委员会委员、中国化工学会过程仿真与模拟专业委员会委员。应邀在英国剑桥大学、爱丁堡大学、赫尔瓦特大学、肯特大学、克莱菲尔德大学、马来西亚石油大学多次进行学术交流和学术报告。国家自然科学奖通讯评审人。

工作简历
2010-01~现在, 中国科学院工程热物理研究所, “****”研究员
2005-06~2010-01,University of Manchester, Research Associate
社会兼职
2023-12-01-2024-12-31,The 10th Asian Joint Workshop on Thermophysics and Fluid Science 2024 (10th AJWTF), Local organizing Committee
2023-12-01-2024-12-31,The International Multiphase Flow Technology Forum (IMFTF) 2024, International Scientific Committee
2023-08-29-2024-09-28,The 14th International Conference on Circulating Fluidized Bed Technology (CFB-14), Local Organizing Committee
2023-05-22-2023-05-25,Fluidization XVII, Session Chair
2022-10-29-2023-10-29,2023年国际流态化会议 Fluidization XVII, 科学委员会委员
2022-05-01-2023-08-31,International Conference on Imaging, Signal Processing and Communications, 科学委员会委员
2020-12-31-今,5th International Conference on Imaging, Signal Processing and Communications, 会议组委会委员
2020-01-01-2020-11-30,1st International Conference on Recent Trends in Developments of Thermo-fluids and Renewable Energy (TFRE-2020), 会议组委会委员
2019-05-26-2019-05-28,2019年国际流态化会议(中国桂林), 分会主席
2019-01-24-今,北京市热物理与能源工程学会, 常务理事
2018-10-14-2018-10-17,2018年美国IEEE IST会议(波兰克拉夫), 分会主席
2018-08-01-2019-08-02,2019年新加坡第三届图像技术会议, 组委会委员
2018-07-01-2018-08-01,2018年马来西亚第二届图像技术会议, 组委会委员
2018-05-30-2019-07-11,Fluidization XVI 国际流态化会议委员, 组委会委员
2017-07-01-2017-12-31,2017年马来西亚第一届图像技术会议, 组委会委员
2017-05-01-今,中国化工学会过程模拟及仿真专业委员会, 委员
2016-09-25-2016-09-27,2016年国际层析成像会议(巴西伊瓜苏), 分会主席
2016-05-25-2016-05-29,2016年国际多相流会议(佛罗伦萨), 分会主席
2015-09-17-2015-09-22,2015年亚洲颗粒技术大会(韩国首尔), 分会主席
2014-10-16-2014-10-19,2014年美国IEEE IST会议(希腊圣托里尼), 分会主席
2014-09-19-今,中国工程热物理学会多相流专业委员会委员, 委员
2014-05-28-2014-05-31,2014年国际颗粒技术大会(中国北京), 分会主席
2014-05-23-2014-05-27,2014年国际流态化会议(中国北京), 分会主席
2013-08-31-今,中国计量测试学会多相流测量专业委员会委员, 委员
2011-01-30-2020-12-29,工程热物理学报编委, 编委
2009-03-31-今,IEEE会员, 会员
2008-03-31-今,AIChE会员, 会员

教授课程

多相流与燃烧过程非侵入式检测技术
热物理过程先进检测技术与原理
研究生课程

热物理过程先进检测技术与原理,20学时 中国科学院工程热物理研究所

研究生课程

多相流与燃烧过程非侵入式检测技术 40学时 中国科学院大学

专利与奖励

   
奖励信息
(1) 2022年MTCUE国际会议杰出贡献奖, 一等奖, 其他, 2022
(2) 国际多相流论坛杰出贡献奖, 一等奖, 其他, 2022
(3) 中国石油大学(北京)专业实践指导教师卓越奖, 特等奖, 研究所(学校), 2022
(4) 中国科学院朱李月华优秀教师奖, 一等奖, 其他, 2021
(5) 中国科学院杰出科技成就奖, 一等奖, 部委级, 2020
(6) Chemical Engineering Science期刊杰出审稿人, 一等奖, 其他, 2019
(7) Chemical EngineeringJournal期刊杰出审稿人, 一等奖, 其他, 2018
(8) 牛顿高级学者基金, 一等奖, 其他, 2017
(9) Particuology期刊杰出审稿人, 一等奖, 其他, 2017
(10) Applied Thermal Engineering期刊杰出审稿人, 一等奖, 其他, 2016
(11) Particuology期刊杰出审稿人, 一等奖, 其他, 2016
(12) 青年学者陈学俊优秀论文奖, 一等奖, 其他, 2016
(13) 中国颗粒学会科技进步奖, 二等奖, 其他, 2016
(14) 青年学者陈学俊优秀论文奖, 一等奖, 其他, 2015
(15) 英国电子与电器工程师学会创新奖提名, 一等奖, 其他, 2009
(16) 过程层析成像国际会议最佳论文, 一等奖, 其他, 2008
(17) 中国科学院院长优秀奖, 一等奖, 部委级, 2003
专利成果
( 1 ) 一种多模态传感器, 发明专利, 2022, 第 1 作者, 专利号: CN114018954A

( 2 ) 颗粒制备调控系统及其调控方法, 发明专利, 2022, 第 1 作者, 专利号: CN113885624A

( 3 ) 一种ECT/MWT双模态成像传感器, 发明专利, 2018, 第 1 作者, 专利号: CN107807155A

( 4 ) 一种电容层析成像传感器, 发明专利, 2017, 第 3 作者, 专利号: CN107422001A

( 5 ) 融合微波成像的电容层析成像方法和装置, 发明专利, 2017, 第 3 作者, 专利号: CN106940337A

( 6 ) 一种电容层析成像传感器, 发明专利, 2017, 专利号: CN106932446A

( 7 ) 循环流化床脱硫脱硝的燃烧方法及装置, 发明专利, 2017, 第 4 作者, 专利号: CN106642089A

( 8 ) 提高循环流化床锅炉燃烧效率的装置, 实用新型, 2017, 第 4 作者, 专利号: CN206145668U

( 9 ) 三维电容层析成像传感器, 专利授权, 2017, 第 2 作者, 专利号: CN106370705A

( 10 ) 基于鲁棒主成分分析的电学层析成像方法及系统, 发明专利, 2016, 第 3 作者, 专利号: CN106228585A

( 11 ) 利用耦合微波成像信息的敏感场的电容层析成像方法, 发明专利, 2016, 第 3 作者, 专利号: CN106153691A

( 12 ) 电容层析成像传感器, 发明专利, 2015, 第 2 作者, 专利号: CN104655692A

( 13 ) LARGE-SCALE CIRCULATING FLUIDIZED BED BOILER, 发明专利, 2014, 第 8 作者, 专利号: US2014299027A1

( 14 ) 具有多个旋风分离器的大型循环流化床锅炉, 发明专利, 2013, 第 6 作者, 专利号: CN102901090A

( 15 ) 带紧凑式外置双流化床换热器的循环流化床锅炉, 发明专利, 2012, 第 5 作者, 专利号: CN102840577A

( 16 ) 一种紧凑并联型外置流化床换热器, 发明专利, 2012, 第 5 作者, 专利号: CN102840578A

( 17 ) 带独立内外循环流化床换热器的循环流化床锅炉, 发明专利, 2012, 第 5 作者, 专利号: CN102840576A

( 18 ) 大型循环流化床锅炉, 发明专利, 2011, 第 8 作者, 专利号: CN102226518A

( 19 ) 一种方形电容层析成象传感器, 发明专利, 2004, 第 3 作者, 专利号: CN1174244C

( 20 ) 一种方形电容层析成象传感器, 发明专利, 2003, 第 3 作者, 专利号: CN1395093A

出版信息

   
发表论文
(1) On-line monitoring of flow process in a spout-fluid bed by combining electrical tomography and high-speed CCD camera, CHEMICAL ENGINEERING SCIENCE, 2023, 通讯作者
(2) CFD-DEM investigation for the gas-solid flow characteristics in a fluidized bed dryer, Chemical Engineering Research and Design, 2023, 通讯作者
(3) Investigation of wet particle drying process in a fluidized bed dryer by CFD simulation and experimental measurement, CHEMICAL ENGINEERING JOURNAL, 2023, 通讯作者
(4) Bubble behaviors of geldart B particle in a pseudo two-dimensional pressurized fluidized bed, PARTICUOLOGY, 2023, 第 4 作者
(5) Effects of pressure and particle size on bubble behaviors in a pseudo 2D pressured fluidized bed with Geldart A/B, B and D particles, CHEMICAL ENGINEERING JOURNAL, 2023, 第 4 作者
(6) Investigation of wetting-drying process in a spout-fluid bed using Acoustic Emission Testing and Electrical Capacitance Tomography, Chemical Engineering Science, 2023, 通讯作者
(7) Moisture Classification of Gas-solid Two-phase Flow Based on pseudo-Siamese Neural Network, Industrial & Engineering Chemistry Research, 2023, 第 3 作者
(8) A novel CFD-DEM model for fluidized bed drying incorporating intra-particle heat and mass diffusion, Industrial & Engineering Chemistry Research, 2023, 第 2 作者
(9) MP-PIC simulation on CO2 gasification of biomass in a pilot plant circulating fluidized bed gasifier, FUEL, 2023, 第 4 作者
(10) Investigation of the Dynamic Measurements for Gas-Oil Two-Phase Flow based on virtual Electrical Capacitance Tomography Sensor and Numerical Simulation, Flow Measurement and Instrumentation, 2023, 通讯作者
(11) Investigation of gas-solid heat and mass transfer in a Wurster coater using a scaled CFD-DEM model, POWDER TECHNOLOGY, 2022, 通讯作者
(12) Optimization of large scale concentric-annulus electrical capacitance tomography sensor with internal electrodes, MEASUREMENT, 2022, 通讯作者
(13) Numerical study on key issues in the Eulerian-Eulerian simulation of fluidization with wide particle size distributions, INTERNATIONAL JOURNAL OF CHEMICAL REACTOR ENGINEERING, 2022, 第 2 作者
(14) Microscopic reaction mechanism for CO2 gasification of cellulose based on reactive force field molecular dynamics simulations, RENEWABLE ENERGY, 2022, 第 4 作者
(15) Application of three-dimensional full-loop CFD simulation in circulating fluidized bed combustion reactors – A review, Powder Technology, 2022, 通讯作者
(16) Monitoring of high-moisture content particle drying in a fluidized bed by microwave and capacitance tomographic sensors, DRYING TECHNOLOGY, 2022, 通讯作者
(17) Effects of pressure on flow characteristics in a pressurized circulating fluidized bed, Effects of pressure on flow characteristics in a pressurized circulating fluidized bed, PARTICUOLOGY, 2021, 第 3 作者
(18) MP-PIC simulation of the gas-solid full-loop flow characteristics in a dual fluidized bed and validation with experimental data, CHEMICAL ENGINEERING JOURNAL, 2021, 第 3 作者
(19) 制药流化床湿式制粒过程CFD-DEM建模:方法及挑战, CFD-DEM Modeling of Wet-granulation Process in a Pharmaceutical Fluidized Bed:Methodologies and Challenges, 工程热物理学报, 2021, 第 2 作者
(20) Effects of pressure on flow regimes transition velocities and bubble properties in a pilot-scale pressurised circulating fluidised bed, CHEMICAL ENGINEERING JOURNAL, 2021, 通讯作者
(21) Application of electrical capacitance tomography in pharmaceutical fluidised beds – A review, CHEMICAL ENGINEERING SCIENCE, 2021, 通讯作者
(22) Numerical study on key issues in the Eulerian-Eulerian simulation of fluidization with wide particle size distributions, INTERNATIONAL JOURNAL OF CHEMICAL REACTOR ENGINEERING, 2021, 第 2 作者
(23) Effects of riser geometry on gas-solid flow characteristics in circulating fluidized beds, Effects of riser geometry on gas–solid flow characteristics in circulating fluidized beds, PARTICUOLOGY, 2020, 第 2 作者
(24) Investigation of gas-solids flow characteristics in a pressurised circulating fluidised bed by experiment and simulation, POWDER TECHNOLOGY, 2020, 通讯作者
(25) Control of pellets coating in a Wurster fluidised bed by means of electrical capacitance tomography, TRANSACTIONS OF THE INSTITUTE OF MEASUREMENT AND CONTROL, 2020, 通讯作者
(26) Mass flow rate measurement of bulk solids based on microwave tomography and microwave Doppler methods, POWDER TECHNOLOGY, 2020, 第 3 作者
(27) Application of electrical capacitance tomography in circulating fluidised beds – A review, APPLIED THERMAL ENGINEERING, 2020, 通讯作者
(28) Investigation of gas-solids flow hydrodynamics in a cold model of a dual fluidised bed gasifier using electrical capacitance tomography sensors, Investigation of gas‒solids flow hydrodynamics in a cold model of a dual fluidised bed gasifier using electrical capacitance tomography sensors, PARTICUOLOGY, 2020, 通讯作者
(29) Investigation of gas-solid flow characteristics in the cyclone dipleg of a pressurised circulating fluidised bed by ect measurement and cpfd simulation, MEASUREMENT SCIENCE AND TECHNOLOGY, 2019, 通讯作者
(30) 加压循环流化床CPFD数值模拟及电容层析成像测量, Investigation of the Flow Characteristics of a Pressurized Circulating Fluidized Bed by CPFD Simulation and ECT Measurement, 工程热物理学报, 2019, 第 4 作者
(31) Real-time solid flow velocity measurement based on a microwave sensor, TRANSACTIONS OF THE INSTITUTE OF MEASUREMENT AND CONTROL, 2019, 第 2 作者
(32) Investigation the Application of Electrical Capacitance Tomography on Pipe Flow with Thick Wall, PROCEEDINGSOFTHEINTERNATIONALCONFERENCEONSENSINGANDIMAGING, 2019, 第 4 作者
(33) CPFD study of a full-loop three-dimensional pilot-scale circulating fluidized bed based on EMMS drag model, POWDER TECHNOLOGY, 2018, 通讯作者
(34) Application of process tomography in gas-solid fluidised beds in different scales and structures, MEASUREMENT SCIENCE AND TECHNOLOGY, 2018, 
(35) 顶喷流化床加湿-干燥过程微波层析成像测量, Measurement of the Wetting and Drying Processes in a Top Spray Fluidized Bed By Microwave Tomography, 工程热物理学报, 2018, 第 4 作者
(36) Online monitoring and characterization of dense phase pneumatically conveyed coal particles on a pilot gasifier by electrostatic-capacitance-integrated instrumentation system, MEASUREMENT, 2018, 第 4 作者
(37) Microwave Doppler velocity measurement using tapered rectangular waveguide antenna with pattern offset correction, MICROWAVE AND OPTICAL TECHNOLOGY LETTERS, 2018, 第 6 作者
(38) Evaluation of electrical resistance tomography with voltage excitation compared with electrical capacitance tomography, MEASUREMENT SCIENCE AND TECHNOLOGY, 2018, 第 3 作者
(39) 新型660MW超超临界环形炉膛循环流化床锅炉技术研究, Study on New 660MW Ultra-supercritical CFB Boiler Technology With an Annular Furnace, 中国电机工程学报, 2018, 第 5 作者
(40) Influence of the internal wall thickness of electrical capacitance tomography sensors on image quality, MEASUREMENT SCIENCE AND TECHNOLOGY, 2018, 第 3 作者
(41) Image Recovery for Electrical Capacitance Tomography Based on Low-Rank Decomposition, IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 2017, 第 2 作者
(42) Effect of Media Permittivity on Imaging Quality of Electrical Capacitance Tomography, 2017 IEEE INTERNATIONAL CONFERENCE ON IMAGING SYSTEMS AND TECHNIQUES (IST), 2017, 第 3 作者
(43) Microwave Tomography for Industrial Process Imaging Example applications and experimental results, IEEE ANTENNAS AND PROPAGATION MAGAZINE, 2017, 第 2 作者
(44) Evaluation of Excitation Strategy for a Large-Scale ECT Sensor With Internal-External Electrodes, IEEE SENSORS JOURNAL, 2017, 第 3 作者
(45) 三维电容层析成像多电极激励模式的稳定性分析, Stability analysis of multi-electrode excitation strategies for 3D ECT, 中国科学院大学学报, 2017, 第 3 作者
(46) 流化床干燥过程压力和电容层析成像测量分析, Investigation of Fluidized Bed Drying Process by Pressure and Electrical Capacitance Tomography, 工程热物理学报, 2016, 第 4 作者
(47) Experimental study and modelling on gas-solid flow in a lab-scale fluidised bed with wurster tube, POWDER TECHNOLOGY, 2016, 通讯作者
(48) Evaluation of electrical capacitance tomography sensor based on the coupling of fluid field and electrostatic field, MEASUREMENT SCIENCE AND TECHNOLOGY, 2016, 第 2 作者
(49) Characterization of a multi-plane electrical capacitance tomography sensor with different numbers of electrodes, MEASUREMENT SCIENCE AND TECHNOLOGY, 2016, 第 2 作者
(50) Evaluation of Excitation Strategies for 3D ECT in Gas-Solids Flow Measurement, IEEE SENSORS JOURNAL, 2016, 第 3 作者
(51) 大型循环流化床环形炉膛中气固流动特性的CPFD数值模拟, CPFD simulation of gas-solids flow in annular combustion chamber of large-scale circulating fluidized bed, 中国科学院大学学报, 2016, 第 3 作者
(52) Investigation of gas-solids flow characteristics in a conical fluidized bed dryer by pressure fluctuation and electrical capacitance tomography, DRYING TECHNOLOGY, 2016, 通讯作者
(53) Evaluation of excitation strategy with multi-plane electrical capacitance tomography sensor, MEASUREMENT SCIENCE AND TECHNOLOGY, 2016, 第 3 作者
(54) 基于稀疏正则化的内外置电极电容层析成像, Sparse regularization based image reconstruction for electrical capacitance tomography with internal-external electrodes, 中南大学学报(自然科学版), 2016, 第 3 作者
(55) Image Reconstruction for ECT Based on Extended Sensitivity Matrix, IEEE SENSORS JOURNAL, 2016, 通讯作者
(56) Investigation of gas-solids flow in a circulating fluidized bed using 3d electrical capacitance tomography, MEASUREMENT SCIENCE AND TECHNOLOGY, 2016, 第 3 作者
(57) 流化床颗粒制备过程层析成像测量和优化控制, Investigation of the Fluidized Bed Coating Process by Process Tomogrpahy and Mathematical Modeling, 工程热物理学报, 2015, 第 1 作者
(58) Investigation of gas-solids flow characteristics in a circulating fluidized bed with annular combustion chamber by pressure measurements and CPFD simulation, CHEMICAL ENGINEERING SCIENCE, 2015, 通讯作者
(59) An evaluation of the rotation of electrodes in multi-plane electrical capacitance tomography sensors, MEASUREMENT SCIENCE AND TECHNOLOGY, 2015, 第 3 作者
(60) Coupling of Fluid Field and Electrostatic Field for Electrical Capacitance Tomography, IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 2015, 第 2 作者
(61) Image reconstruction for electrical capacitance tomography based on sparse representation, IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 2015, 第 2 作者
(62) 三维电容层析成像多电极激励模式稳定性分析, 2015年中国工程热物理学会多相流学术年会, 2015, 第 3 作者
(63) 流化床流动过程压力和电容层析成像测量, 2015年中国工程热物理学会多相流学术年会, 2015, 第 4 作者
(64) 循环流化床返料系统固体颗粒微波多普勒测量, Measurement of Solid Mass Flow Rate in the Downcomers of a Circulating Fluidized Bed by Microwave Doppler Method, 工程热物理学报, 2014, 第 6 作者
(65) Measurement of Particle Concentration in a Wurster Fluidized Bed by Electrical Capacitance Tomography Sensors, AICHE JOURNAL, 2014, 通讯作者
(66) Characterization of Electrical Capacitance Tomography Sensors With Different Diameter, IEEE SENSORS JOURNAL, 2014, 第 2 作者
(67) 流化床颗粒制备过程层析成像测量和优化控制分析, 2014年中国工程热物理学会, 2014, 第 1 作者
(68) 富氧煤粉燃烧火焰结构和NO排放研究, 2014年中国工程热物理学会, 2014, 第 4 作者
(69) A sparsity reconstruction algorithm for electrical capacitance tomography based on modified Landweber iteration, MEASUREMENT SCIENCE AND TECHNOLOGY, 2014, 第 2 作者
(70) Investigation of flow hydrodynamics and regime transition in a gas-solids fluidized bed with different riser diameters, CHEMICAL ENGINEERING SCIENCE, 2014, 通讯作者
(71) 循环流化床多旋风分离器入口电容层析成像测量, Investigation the Solid Phase Distribution in the Inlet of Multi-Cyclone of a Circulating Fluidised Bed by Electrical Capacitance Tomography, 工程热物理学报, 2014, 第 1 作者
(72) 大型循环流化床环形炉膛气固流动特性CPFD数值模拟研究, 2014年中国工程热物理学会, 2014, 第 3 作者
(73) Modelling and experimental investigation of the full-loop gas-solid flow in a circulating fluidized bed with six cyclone separators, CHEMICAL ENGINEERING SCIENCE, 2014, 通讯作者
(74) 220t/h节能环保型CFB锅炉的设计, Design of 220 t/h Circulating Fluidized Bed Boilers with Energy Conservation & Environmental Protection, 工业锅炉, 2013, 第 5 作者
(75) Concentric-annulus electrical capacitance tomography sensors, MEASUREMENT SCIENCE AND TECHNOLOGY, 2013, 第 3 作者
(76) 循环流化床返料系统固体颗粒微波多普勒测量, 中国工程热物理学会-多相流, 2013, 第 1 作者
(77) 220t/h CFB锅炉旋风分离器性能的数值模拟研究, Improving the Cyclone Performance of One 220 t/h CFB Boiler by Computational Fluid Dynamics, 工业锅炉, 2013, 第 2 作者
(78) 循环流化床循环系统CPFD数值模拟, 中国工程热物理学会-多相流, 2013, 第 3 作者
(79) 超临界循环流化床环形炉膛气固流场数值模拟研究, 中国工程热物理学会-多相流, 2013, 第 3 作者
(80) 循环流化床多旋风分离器入口电容层析成像测量, 中国工程热物理学会, 2012, 第 1 作者
(81) 矩形电容层析成像传感器仿真模拟和实验测量, Simulation and experiment of rectangular electrical capacitance tomography sensor for gas-solid two phase flow measurement, 仪器仪表学报, 2012, 第 2 作者
(82) 循环流化床多分离器返料系统颗粒分布特性实验研究, Investigation the Solid Distribution in a Circulating Fluidisied Bed With Six Cyclone Separators by Electrical Capacitance Tomography, 工程热物理学报, 2012, 第 1 作者
(83) 超临界循环流化床锅炉进风系统数值模拟分析与比较, CFD Simulation and Analysis for the Air Flow in the Primary Air Chamber of a Supper-Critical Circulating Fluidized Bed, 工程热物理学报, 2011, 第 1 作者
(84) 六个旋风分离器并联布置循环流化床的实验研究, Experimental Study on a Circulating Fluidized Bed With Six Cyclone Separators, 中国电机工程学报, 2011, 第 5 作者
(85) 循环流化床多分离器返料系统颗粒分布特性实验研究, 中国工程热物理学会(多相学), 2011, 第 2 作者
(86) 超临界循环流化床锅炉进风系统数值模拟分析与比较, 中国工程热物理学会(燃烧学), 2010, 第 1 作者
(87) 旋风分离器固体颗粒浓度三维电容层析成像分布, 工程热物理学报, 2006, 第 1 作者
(88) 电容层析成像中通用迭代法的研究, A General Iterative Algorithm for Image Reconstruction with Electrical Capacitance Tomography, 仪器仪表学报, 2006, 第 6 作者
(89) 基于交流充放电系统的电容层析成像系统软件设计, Software Design for the AC-based ECT System, 仪器仪表学报, 2005, 第 1 作者
(90) KIVA程序网格生成算法的改进及雷诺应力模型计算, 工程热物理学报, 2005, 第 1 作者
(91) 基于快速投影LANDWEBER法的电容层析成像图像重建算法研究, A FAST PROJECTED-LANDWEBER METHOD FOR IMAGE RECONSTRUCTION FOR ECT, 中国电机工程学报, 2005, 第 5 作者
(92) 基于交流充放电系统的电容层析成像系统软件设计, Software Design for the AC-based ECT System, 仪器仪表学报, 2005, 第 1 作者
(93) 用雷诺应力模型计算旋风分离器中气-固两相流动, NUMERICAL SIMULATION AND EXPERIMENTAL STUDY ON THE GAS-PARTICLE TWO-PHASE FLOWS IN CYCLONE SEPARATORS, 工程热物理学报, 2004, 第 1 作者
(94) 不同湍流模型在内燃机缸内流动过程数值模拟中的应用和比较, Application and Comparison of Different Turbulent Models with Computations of In-Cylinder Turbulent Flows in ICE, 燃烧科学与技术, 2004, 第 1 作者
(95) 冻土块石路基的保冷效果数值计算研究, Numerical Simulation on the Cooling Effect of Gravels Embankment in Permafrost Areas, 铁道学报, 2004, 第 3 作者
(96) 电容层析成像技术在旋风分离器固体浓度测量中的应用, USING ELECTRICAL CAPACITANCE TOMOGRAPHY FOR MEASURING THE SOLIDS DISTRIBUTION IN CYCLONE SEPARATOR, 中国电机工程学报, 2004, 第 1 作者
(97) 电容层析成像技术在流化床气固两相流测量中的应用, Study on the Application of Electric Capacitance Tomography on the Measurement of Gas-Solid Two-Phase Flows in Fluidized Beds, 动力工程, 2004, 第 3 作者
(98) 惯性分离器内气固两相流雷诺应力数值模拟, Numerical Simulation of Reynolds Stresses of Gas-solid Two-phase Flows in an Inertial Separator, 热能动力工程, 2004, 第 1 作者
(99) 旋风分离器料腿中颗粒流量电容相关测试分析与实验研究, Mass flow measurement of solids flow in the dipleg of a cyclone separator using electrical capacitance sensors, 中国电机工程学报, 2004, 第 1 作者
(100) 电容层析成像三维成像算法研究与软件设计, Virtual 3D Imaging and Software Design for Electrical Capacitance Tomography, 仪器仪表学报, 2004, 第 1 作者
(101) 用雷诺应力模型计算旋风分离器中气-固两相流动, NUMERICAL SIMULATION AND EXPERIMENTAL STUDY ON THE GAS-PARTICLE TWO-PHASE FLOWS IN CYCLONE SEPARATORS, 北京林业大学学报, 2004, 第 1 作者
(102) ECT技术对成像的影响——用低介电参数物质标定, The Influence of Image Quality of Calibrating --With Low Permittivity Material in ECT, 石油化工高等学校学报, 2004, 第 3 作者
(103) 电容层析技术在旋风分离器及料腿中固体颗粒浓度、速度和流量测试中的应用, Velocity and Mass Flow Measurement of Solids Flow in the Cyclone Separator and Dipleg Using Electrical Capacitance Sensors, 动力工程, 2004, 第 1 作者
(104) Applications of Electrical Capacitance Tomography in Two Phase Flow Visualization, JOURNAL OF THERMAL SCIENCE, 2004, 第 3 作者
(105) Experimental Studies on Combustion Characteristics of Mixed Municipal Solid Waste, Experimental Studies on Combustion Characteristics of Mixed Municipal Solid Waste, JOURNAL OF THERMAL SCIENCE, 2003, 第 4 作者
(106) 风冷式冷渣器的测试及数值计算, Tests and Numerical Simulation of Slag Cooling Equipment by Air, 节能技术, 2003, 第 4 作者
(107) 混合垃圾燃烧特性的实验研究, Experimental Research on Combustion Characteristics of Mixed Waste, 动力工程, 2003, 第 6 作者
(108) 旋风分离器中气-固两相流数值计算与实验研究, 2003, 第 1 作者
(109) 风冷式冷渣器的实验研究, Tests of slag cooling equipment by air, 节能, 2003, 第 4 作者
(110) 交流ECT测量系统在实际中的应用, The Usage of New AC-based Capacitance Tomography System in Experiment, 仪器仪表学报, 2003, 第 1 作者
(111) 不同湍流模型在旋风分离器三维数值模拟中的应用和比较, Application and Comparison of Different Turbulence Models in the Three-dimensional Numerical Simulation of Cyclone Separators, 热能动力工程, 2003, 第 1 作者
(112) 混合垃圾在热重分析仪和流化床中的燃烧特性, Combustion Characteristics of Mixed Municipal Solid Waste in Thermogravimetric Analysis and Lab Scale Fluidized Bed, 环境科学, 2002, 第 4 作者
(113) Experimental Study on Measurement of Flame Temperature Distribution Using the Two-Color Method, JOURNAL OF THERMAL SCIENCE, 2002, 第 5 作者
(114) 迭代法ECT对循环流化床底部固体浓度的测量, 工程热物理学报, 2002, 第 3 作者
(115) 双色法火焰监测分析技术用于火焰温度场的实测试验, An experimental study on measuring the flame temperature distribution by using a two-color flame monitoring technology, 中国电机工程学报, 2002, 第 6 作者
(116) Experimental Study on Wavy-Flow Pneumatic Conveying in Horizontal Pipe, JOURNAL OF THERMAL SCIENCE, 2002, 第 3 作者
(117) 内燃机进气道和缸内三维流场数值模拟, 工程热物理学报, 2002, 第 1 作者
(118) 双层电容层析成像传感器及应用, Dual-plane Electrical Capacitance System and Usage in Experience, 仪表技术与传感器, 2002, 第 1 作者
(119) 循环流化床固定分布的层析成象质量, 工程热物理学报, 2001, 第 2 作者
(120) 循环流化床固体分布的层析成象测量, 工程热物理学报, 2001, 第 2 作者
(121) 内—外置电极ECT传感器两相流成像仿真研究, A Simulation Study of Image Reconstruction of Square ECT with Internal Electrodes, 仪器仪表学报, 2001, 第 4 作者
(122) 应用电容层析成象和压差对比法对流化床内固体颗粒浓度分布的测量研究, 工程热物理学报, 2000, 第 4 作者
(123) The Effect of Water Spray upon Incineration Flue Gas Clean-up, JOURNAL OF THERMAL SCIENCE, 2000, 第 1 作者

科研活动

国际会议邀请报告:

1. IEEE IST2014,2014年10月17日,Santrans, Greece, Keynote Speaker;

2. APT2015,2015年9月17日,Soeal, South Koreal, Keynote Speaker;

3. PIERS,2017年11月29日,Singapore,Invited Speaker;

4. WCIPT8, 2018年4月25日,Orland, FL, USA,Keynote Speaker;

5. FLUIXIZATION XVI, 2019年5月27日,Guilin,China,Keynote Speaker;

6. Catalysis, Chemical Enginering and Technology (GSCCET2021), France, 2021, Invited Speaker;

7. Global Congress Expo on Power and Energy Engineering, 2021, Spain, Plenary Speaker; 

8. UK-China International Particle Technology Forum VIII, 2021, Guilin, China, Invited Speaker. 


大学邀请报告:


1. 2019年10月4日,英国,Heriot-Watt University, 邀请报告;

2. 2019年5月25日,新西兰,Canterbury University, 邀请报告;

3. 2019年4月15日,清华大学自动化系,邀请报告;

4. 2019年1月9日,武汉理工大学,邀请报告;

5. 2018年12月7日,华北电力大学(保定),邀请报告;

6. 2018年8月1日,中北大学,邀请报告;

7. 2018年10月22日,德国弗莱贝格工业大学,TU Bergakademie Freiberg,邀请报告;

8. 2017年9月2日,英国克莱菲尔德大学,Cranfield University,邀请报告;

9. 2016年12月4日,辽宁石油化工学院,邀请报告;

10. 2016年7月5日,英国爱丁堡大学, University of Edinburgh,邀请报告;

11. 2016年7月1日,英国肯特大学, University of Kent, 邀请报告;

12. 2014年6月20日,英国赫尔瓦特大学, Heriot-Watt University,邀请报告;

13. 2014年6月21日,英国爱丁堡大学, University of Edinburgh,邀请报告;

14. 2012年7与18日,剑桥大学,Cambridge University,邀请报告;

15. 2011年5月22日,马来西亚石油大学,Pentrans Univeristy of Technology,邀请报告;


科研项目
( 1 ) 气固旋风分离器放大过程电容层析成像测量和数值计算研究, 负责人, 国家任务, 2011-02--2014-01
( 2 ) 中国院****, 负责人, 中国科学院计划, 2011-08--2015-01
( 3 ) 超临界循环流化床大型化数值计算和冷态实验, 负责人, 境内委托项目, 2011-05--2012-06
( 4 ) 复杂气固流态化过程关键参数测量和过程优化, 负责人, 国家任务, 2014-01--2018-12
( 5 ) 复杂流化床反应器测量控制系统研制, 负责人, 中国科学院计划, 2014-01--2016-07
( 6 ) “煤清洁燃烧利用”创新交叉团队, 负责人, 中国科学院计划, 2016-01--2018-12
( 7 ) 高效煤气转换过程多尺度气固流动在线诊断与控制, 负责人, 国家任务, 2018-01--2021-12
( 8 ) 湿天然气管道流动形态成像测试系统设计, 负责人, 境内委托项目, 2017-01--2018-12
( 9 ) 英国皇家学会“牛顿高级学者基金”(Newton Advanced Fellowship), 负责人, 其他国际合作项目, 2017-11--2020-11
( 10 ) 固体燃料清洁利用过程污染物形成机理化学分析与过程监测, 负责人, 国家任务, 2018-04--2020-03
( 11 ) 高效煤气转化过程多相流参数在线监测技术与控制, 负责人, 中国科学院计划, 2019-01--2021-12
参与会议
(1)Optimizing the Operating Parameters for Pharmaceutical Fluidized Bed Dryer by Process Tomography and CFD Modelling   王海刚   2019-06-28
(2)Investigation the Strong Swirling Gas-Solids Flow in Cyclone Separators Based on Process Tomography and CFD Simulation   国际流态化会议   王海刚   2019-05-26
(3)Investigation of pressurized gas-liquid two-phase flow with electrical capacitance tomography   IEEE Instrumentation & Measurement Technology Conference – I2MTC   王海刚   2019-05-21
(4)Measurement of External-Solids Circulation Flux in a Circulating Fluidized Bed by Electrical Capacitance Tomography and Microwave Doppler Radar   国际层析成像技术会议   王海刚   2018-10-16
(5)Control of pellets coating in a Wurster type fluidized bed based on electrical capacitance tomography measurement   国际计量大会   车汉桥,王海刚   2018-09-03
(6)Investigation of the complex gas-solids flow characteristics in a fluidized bed with multi-cyclone separators system by process tomography and CPFD simulation   第八届国际颗粒技术大会   王海刚   2018-04-22
(7)Investigation the Gas-solids Flow Hydrodynamic Characteristics in Fluidized Beds by Process Tomography   2017年国际计算电磁学大会   王海刚   2017-11-18
(8)ON-LINE MONITORING OF COATING PROCESS IN A WURSTER TYPE FLUIDIZED BED USING ELECTRICAL CAPACITANCE TOMOGRAPHY SENSOR   2017年国际颗粒技术会议   2017-06-27
(9)INVESTIGATION OF THE DENSE FLOW REGIMES IN A GAS-SOLIDS FLUIDIZED BED WITH COMPLEX RISER SHAPE BY CFD SIMUALTION AND EXPERIMENT MEASURMENT   第12届国际流态化会议   2017-06-26
(10)Key issues for the application of process tomography in multi-scale gas-solids fluidized bed   王海刚   2016-09-26
(11)Modeling and Experimental Investigation the Gas-Solids Flows in Circulating Fluidized Beds with Different Scales    2016-05-24
(12)Modeling and Experimental Investigation of Gas-Solid Flows in Circulating Fluidized Beds   Haigang Wang   2015-09-15
(13)Electrical Capacitance Tomogrpahy and Industry Application   Haigang Wang   2014-10-16
(14)Investigation the large scale fluidized bed process in pharmaceutical industry by experiment and CFD simulation   Yu Jiang, Haigang Wang   2014-05-22
(15), Investigation the hydrodynamics behavior in a CFB boiler with complex combustion chamber by CFD   Qiu Guizhi, Haigang Wang   2014-05-12
(16)Imaging gas-solids distribution in cyclone inlet of circulating fluidised bed with rectangular ECT sensor   Wang H G and Yang W Q   2011-05-17
(17)Imaging pharmaceutical multi-processes in fluidized bed by electrical capacitance tomography   H G Wang, L Gradinarsky, L Cerullom S Folestad and W Q Yang   2010-11-10
(18)Scale up from lab-scale to production-scale and validation by fluid dynamic simulation   25. H G wang, W Q Yang, Julian Taylor, Trevor Page and Ian Proctor   2010-09-06
(19)Investigation of a pilot-scale fluidised bed by electrical capacitance tomography and fluid dynamic simulation   24. H G Wang, W Q Yang, J Taylor, T P Page and I Proctor   2009-11-04
(20)Online monitoring and flow regime identification of fluidised bed drying and granulation processes   23. H G Wang, W Q Yang, I Proctor, J Taylor, A Marr and T G Page   2009-05-05
(21)Measurement of fluidised bed dryer by different frequency and different normalisation methods with electrical capacitance tomography   H G Wang and W Q Yang   2008-11-12
(22)Optimum control of fluidised bed dryer by electrical capacitance tomography, Part 1: Moisture measurement and analysis   H G Wang, P Senior, R Mann and W Q Yang   2008-08-28
(23)Demonstration of true 3D image reconstruction for electrical capacitance tomography   H G Wang, Y Li and W Q Yang   2006-12-12
(24)Theoretical and experimental studies of the dynamic of bubbling and slugging fluidised beds   H G Wang, W Q Yang, T Dyakowski and S Liu   2006-10-12
(25)Analysis of chaotic behaviour of gas-solids flows in cyclone separators using tomography   H G Wang, S Liu, F Jiang and W Q Yang   2005-09-05
(26)Measurement of axis and angular velocities using electrical capacitance sensors   H G Wang, S Liu, W Q Yang and F Jiang   2004-09-06
(27)Separation characteristic of gas-solid flow in a U-beam separator using RSM model   H G Wang, S Liu and F Jiang   2004-05-04
(28)3D presentation of images with capacitance tomography   H G Wang, S Liu, F Jiang and W Q Yang   2003-09-03

合作情况

   
项目协作单位

国内:
1. 清华大学 自动化系(中科院创新交叉团队)
2. 北京航天航空大学 (中科院创新交叉团队)

3. 武汉理工大学(中科院创新交叉团队)

4. 浙江大学(中科院创新交叉团队)


国际:

1. University of Manchester, UK (自然基金委重点国际合作项目/科学院对外重点合作项目/牛顿基金)
2. Heriot-Watt University, UK(自然基金委-英国皇家学会合作项目)
3. Cranfield University, UK(自然基金委-英国皇家学会合作项目)

4. University of Kent, UK(科学院对外重点合作项目)


指导学生

已指导学生

赵国荣  硕士研究生  080702-热能工程  

邱桂芝  博士研究生  080702-热能工程  

蒋宇  硕士研究生  085206-动力工程  

葛瑞环  硕士研究生  085206-动力工程  

张娇龙  硕士研究生  080702-热能工程  

林勇磊  博士研究生  080701-工程热物理  

车汉桥  博士研究生  080702-热能工程  

周航  硕士研究生  080701-工程热物理  

孔润娟  博士研究生  080701-工程热物理  

朱晓丽  博士研究生  080702-热能工程  

罗占  硕士研究生  085206-动力工程  

刘再兴  博士研究生  080702-热能工程  

宋文浩  博士研究生  080702-热能工程  

现指导学生

马志扬  博士研究生  080702-热能工程  

黄玉  博士研究生  080702-热能工程  

徐一  博士研究生  080702-热能工程  

学生获奖情况

1. 邱桂芝,2012年国家奖学金

2. 葛瑞环,2014年国家留学基金,澳大利亚Monash大学博士,英国伯明翰大学、巴斯大学和谢菲尔德大学博士后

3. 蒋   宇, 爱尔兰University College Cork攻读博士

4. 张娇龙,2015年中国工程热物理年会多相流分会“青年学者陈学俊优秀论文奖”

5. 邱桂芝,2015年中国科学院“朱李月华”优秀奖

6. 周   航,2016年国家奖学金

7. 车汉桥,2016年中国工程热物理年会多相流分会“青年学者陈学俊优秀论文奖”

8. 周  航,2017年国家留学基金,加拿大西安大略大学

9. 周  航,2017年美国犹他大学全额奖学金,攻读博士

10.朱晓丽,2019年中英联合研究博士生交流创新基金,Heriot-Watt University, UK

11.车汉桥,2019年,英国帝国理工大学、伯明翰大学,博士后

12.朱晓丽,2020年,研究所“四维动力奖学金”

13.罗   占,2021年,澳大利亚新南威尔士大学,攻读博士

14.朱晓丽,2021年,中英颗粒论坛最佳海报奖

15.刘再兴,2021年,中国计量测试学会多相流会议优秀论文奖

16.马志扬,2023年,IMFTF国际多相流论坛优秀报告奖

17.徐   一,2023年,中国科学院科学实验汇演二等奖

18.马志扬,2023年,第十二届全国流态化会议优秀报告奖